Additional education

«Translator in the field of professional communication»

The purpose of the program is to form students' professional competencies necessary for professional activity in the field of applied translation studies by branches of knowledge. The main objectives of the retraining program are:

• obtaining basic linguistic knowledge, skills and abilities in the field of modern theory and practice of translation studies, necessary for practical translation and for the objective selection and evaluation of translation solutions, techniques and methods of translation.

• the formation of a worldview, the development of critical thinking and intelligence, erudition, the formation of additional foreign language linguistic professional competencies in the profile of their activities.

The program also focuses students' attention on modern tools and environments (the Internet, national and special text corpora, electronic dictionaries) in the field of new information technologies that improve translation practice.

As a result of mastering the program , the listener must have the following professional competencies: the ability to use the conceptual apparatus, approaches and methodological basis of the theory and practice of translation in their professional activities. 

As a result, the listener of the program:

• Knows the conceptual apparatus, approaches and methodological basis of the theory and practice of translation.

• He is able to apply in practice the conceptual apparatus, approaches and methodological basis of the theory and practice of translation.

• He has practical experience in applying the conceptual apparatus, approaches and methodological basis of the theory and practice of translation in his professional activity.

The labor intensity of training under this program is 1500 hours, including all types of contact and independent educational work of the listener. The total duration of training is 2 years.

The form of training is full–time and part-time, including using e-learning components.

Contact person:
Sosnina Ekaterina Petrovna
tel.: +79603785629
e-mail: sosnina@ulstu.ru

Professional development program "Training of specialists to workat milling machining centersmanufactured by DMG MORI"

The purpose of the program is to form professional competencies among students in the field of preparation of control programs for processing workpieces at DMG MORI milling processing centers with Celos + Sinumerik 840D system, aimed at reducing the time of technological preparation of production.

The teaching of the discipline provides for the following forms of organization of the educational process: lectures, practical classes, laboratory work, independent work of students.

The duration of training is 72 hours.

Thematic plan of the discipline:

1. Cutting and auxiliary tools for milling machines

1.1. Milling cutters

1.1.1. Classification of milling cutters (by purpose, design, method of attachment on the machine, tooth design, tooth arrangement relative to the axis)

1.1.2. Modern milling cutter designs

1.1.3. Materials for the manufacture of milling cutters

1.1.4. Selection of the design and material of the cutting part of the cutters

1.1.5. Assignment of cutting modes during milling

1.2. Hole Processing tool

1.2.1. Classification of hole processing tools

1.2.2. Modern designs of tools for hole processing

1.2.3. Materials for the manufacture of tools for hole processing

1.2.4. Selection of the design and material of the cutting part of the tool for hole processing

1.2.5. Assignment of cutting modes when processing holes (drilling, boring, countersinking, deployment)

1.3. Threading tool

1.3.1. Classification of threading tools

1.3.2. Modern designs of threading tools

1.3.3. Materials for the manufacture of threading tools

1.3.4. Selection of the design and material of the cutting part of the threading tool

1.3.5. Purpose of cutting modes during threading, threading

2. Technological preparation of the production of workpiece processing on CNC machines

2.1. Stages of technological preparation of parts on CNC machines

2.2. The concept of basing and bases in mechanical engineering. Reference point. The six-point rule

2.3. Classification of databases. Typical basing schemes. Sets of bases

2.4. Development of schemes for basing workpieces on machining operations

2.5. Basing error

2.6. Calculation of errors based on sustained dimensions due to the adopted installation scheme

2.7. Principles of combination and unity of bases

2.8. Certainty and uncertainty of basing

2.9. Organized and unorganized change of bases

2.10. Technological preparation of the production of workpieces processing on milling machines of the milling group

2.10.1. Methods of basing workpieces on milling group machines. Selection of rational schemes for basing workpieces

2.10.2. Methods of milling flat and shaped surfaces, ledges, grooves and pockets, hole processing

3. Basics of programming a milling machining center

3.1. Capabilities and features of milling group machines

3.2. Operator panel and machine console keys

3.3. Coordinate systems of the machine and the part

3.4. Tool management (overview of the cutting tools used; parameters of cutting tools; filling in the list of tools; tool management within the list; tool measurement by workpiece)

3.5. Basics of developing a control program for manufacturing parts (absolute and incremental dimensions; options for setting straight lines and circles)

3.6. Naming, creation of program frames

3.7. Program structure (setting the workpiece, offset of the zero point of the part, tool change point; calling the cutting tool; free approach to the beginning of processing; exit to the tool change point; straight or circular movements along the trajectory; review and assignment of simple milling cycles; review and assignment of milling cycles of the contour; creation of a new contour; sampling of residual material; review and assignment of hole processing cycles; graphical simulation of processing; repetition of program frames; automatic repetition of program execution)

3.8. Editing (editing program frames; contour editing)

3.9. Program management (erasing programs; renaming programs; copying programs with a new name; copying and changing program frames; copying and changing the contour with a new name; saving program data (zero points, tool data))

Advanced training program "Programming and work on the MAZAK machine" (milling machines)

The purpose of the program is to form professional competencies among students in the field of preparation of control programs for processing workpieces at MAZAK milling processing centers, aimed at reducing the time of technological preparation of production.

The teaching of the discipline provides for the following forms of organization of the educational process: lectures, practical classes, laboratory work, independent work of students.

The duration of training is 72 hours.

Thematic plan of the discipline:

1. Cutting and auxiliary tools for milling machines

1.1. Milling cutters

1.1.1. Classification of milling cutters (by purpose, design, method of attachment on the machine, tooth design, tooth arrangement relative to the axis)

1.1.2. Modern milling cutter designs

1.1.3. Materials for the manufacture of milling cutters

1.1.4. Selection of the design and material of the cutting part of the cutters

1.1.5. Assignment of cutting modes during milling

1.2. Hole Processing tool

1.2.1. Classification of hole processing tools

1.2.2. Modern designs of tools for hole processing

1.2.3. Materials for the manufacture of tools for hole processing

1.2.4. Selection of the design and material of the cutting part of the tool for hole processing

1.2.5. Assignment of cutting modes when processing holes (drilling, boring, countersinking, deployment)

1.3. Threading tool

1.3.1. Classification of threading tools

1.3.2. Modern designs of threading tools

1.3.3. Materials for the manufacture of threading tools

1.3.4. Selection of the design and material of the cutting part of the threading tool

1.3.5. Purpose of cutting modes during threading, threading

2. Technological preparation of the production of workpiece processing on CNC machines

2.1. Stages of technological preparation of parts on CNC machines

2.2. The concept of basing and bases in mechanical engineering. Reference point. The six-point rule

2.3. Classification of databases. Typical basing schemes. Sets of bases

2.4. Development of schemes for basing workpieces on machining operations

2.5. Basing error

2.6. Calculation of errors based on sustained dimensions due to the adopted installation scheme

2.7. Principles of combination and unity of bases

2.8. Certainty and uncertainty of basing

2.9. Organized and unorganized change of bases

2.10. Technological preparation of the production of workpieces processing on milling machines of the milling group

2.10.1. Methods of basing workpieces on milling group machines. Selection of rational schemes for basing workpieces

2.10.2. Methods of milling flat and shaped surfaces, ledges, grooves and pockets, hole processing

3. Basics of programming a milling machining center

3.1. Capabilities and features of milling group machines

3.2. Operator panel and machine console keys

3.3. Coordinate systems of the machine and the part

3.4. Tool management (overview of the cutting tools used; parameters of cutting tools; filling in the list of tools; tool management within the list; tool measurement by workpiece)

3.5. Basics of developing a control program for manufacturing parts (absolute and incremental dimensions; options for setting straight lines and circles)

3.6. Naming, creation of program frames

3.7. Program structure (setting the workpiece, offset of the zero point of the part, tool change point; calling the cutting tool; free approach to the beginning of processing; exit to the tool change point; straight or circular movements along the trajectory; review and assignment of simple milling cycles; review and assignment of milling cycles of the contour; creation of a new contour; sampling of residual material; review and assignment of hole processing cycles; graphical simulation of processing; repetition of program frames; automatic repetition of program execution)

3.8. Editing (editing program frames; contour editing)

3.9. Program management (erasing programs; renaming programs; copying programs with a new name; copying and changing program frames; copying and changing the contour with a new name; saving program data (zero points, tool data))

Professional development program "Training of specialists to work at DMG MORI turning processing centers"

The purpose of the program is to form professional competencies among students in the field of preparation of control programs for processing workpieces at DMG MORI turning machining centers with the Sinumerik 840D system, aimed at reducing the time of technological preparation of production.

The teaching of the discipline provides for the following forms of organization of the educational process: lectures, practical classes, laboratory work, independent work of students.

The duration of training is 72 hours.

Thematic plan of the discipline:

1. Cutting and auxiliary tools for milling machines

1.1. Incisors

1.1.1. Classification of cutters (by purpose, design, method of attachment on the machine, design of the cutting part)

1.1.2. Modern designs of incisors

1.1.3. Modern designs of incisors

1.1.4. Selection of the design and material of the cutting part of the cutters

1.1.5. Assignment of cutting modes during turning

1.2. Hole Processing tool

1.2.1. Classification of hole processing tools

1.2.2. Modern designs of tools for hole processing

1.2.3. Materials for the manufacture of tools for hole processing

1.2.4. Selection of the design and material of the cutting part of the tool for hole processing

1.2.5. Assignment of cutting modes when processing holes (drilling, boring, countersinking, deployment)

1.3. Threading tool

1.3.1. Classification of threading tools

1.3.2. Modern designs of threading tools

1.3.3. Materials for the manufacture of threading tools

1.3.4. Selection of the design and material of the cutting part of the threading tool

1.3.5. Purposae of cutting modes during threading, threading

2. Technological preparation of the production of workpiece processing on CNC machines

2.1. Stages of technological preparation of parts on CNC machines

2.2. The concept of basing and bases in mechanical engineering. Reference point. The six-point rule

2.3. Classification of databases. Typical basing schemes. Sets of bases

2.4. Development of schemes for basing workpieces on machining operations

2.5. Basing error

2.6. Calculation of errors based on sustained dimensions due to the adopted installation scheme

2.7. Principles of combination and unity of bases

2.8. Certainty and uncertainty of basing

2.9. Organized and unorganized change of bases

2.10. Technological preparation of the production of workpieces processing on lathes of the turning group

2.10.1. Methods of basing workpieces on lathes of the turning group. Selection of rational schemes for basing workpieces

2.10.2. Methods of turning cylindrical, conical and shaped surfaces, grooves and recesses, hole and thread processing

3. Basics of programming a turning machining center

3.1. Capabilities and features of turning group machines

3.2. Operator panel and machine console keys

3.3. Coordinate systems of the machine and the part

3.4. Tool management (overview of the cutting tools used; parameters of cutting tools; filling in the list of tools; tool management within the list; tool measurement by workpiece)

3.5. Basics of developing a control program for manufacturing parts (absolute and incremental dimensions; options for setting straight lines and circles)

3.6. Naming, creation of program frames

3.7. Program structure (setting the workpiece, offset of the zero point of the part, the tool change point; calling the cutting tool; free approach to the beginning of processing; exit to the tool change point; straight or circular movements along the trajectory; review and assignment of simple turning cycles; review and assignment of contour turning cycles; creation of a new contour; review and assignment of hole processing cycles; review and assignment of simple milling cycles; review and assignment of contour milling cycles; creation of a new contour; selection of residual material; graphical simulation of processing; repetition of program frames; automatic repetition of program execution)

3.8. Editing (editing program frames; contour editing)

3.9. Program management (erasing programs; renaming programs; copying programs with a new name; copying and changing program frames; copying and changing the contour with a new name; saving program data (zero points, tool data))

Advanced training program "Programming and working on the MAZAK machine" (lathes)

The purpose of the program is the formation of professional competencies among students in the field of preparation of control programs for processing workpieces at MAZAK turning processing centers, aimed at reducing the time of technological preparation of production.

The teaching of the discipline provides for the following forms of organization of the educational process: lectures, practical classes, laboratory work, independent work of students.

The duration of training is 72 hours.

Thematic plan of the discipline:

1. Cutting and auxiliary tools for milling machines

1.1. Incisors

1.1.1. Classification of cutters (by purpose, design, method of attachment on the machine, design of the cutting part)

1.1.2. Modern designs of incisors

1.1.3. Materials for the manufacture of the cutting part of the cutters

1.1.4. Selection of the design and material of the cutting part of the cutters

1.1.5. Assignment of cutting modes during turning

1.2. Hole Processing tool

1.2.1. Classification of hole processing tools

1.2.2. Modern designs of tools for hole processing

1.2.3. Materials for the manufacture of tools for hole processing

1.2.4. Selection of the design and material of the cutting part of the tool for hole processing

1.2.5. Assignment of cutting modes when processing holes (drilling, boring, countersinking, deployment)

1.3. Threading tool

1.3.1. Classification of threading tools

1.3.2. Modern designs of threading tools

1.3.3. Materials for the manufacture of threading tools

1.3.4. Selection of the design and material of the cutting part of the threading tool

1.3.5. Assignment of cutting modes during threading, threading

2. Technological preparation of the production of workpiece processing on CNC machines

2.1. Stages of technological preparation of parts on CNC machines

2.2. The concept of basing and bases in mechanical engineering. Reference point. The six-point rule

2.3. Classification of databases. Typical basing schemes. Sets of bases

2.4. Development of schemes for basing workpieces on machining operations

2.5. Basing error

2.6. Calculation of errors based on sustained dimensions due to the adopted installation scheme

2.7. Principles of combination and unity of bases

2.8. Certainty and uncertainty of basing

2.9. Organized and unorganized change of bases

2.10. Technological preparation of the production of workpieces processing on lathes of the turning group

2.10.1. Methods of basing workpieces on lathes of the turning group. Selection of rational schemes for basing workpieces

2.10.2. Methods of turning cylindrical, conical and shaped surfaces, grooves and recesses, hole and thread processing

3. Basics of programming a turning machining center

3.1. Capabilities and features of turning group machines

3.2. Operator panel and machine console keys

3.3. Coordinate systems of the machine and the part

3.4. Tool management (overview of the cutting tools used; parameters of cutting tools; filling in the list of tools; tool management within the list; tool measurement by workpiece)

3.5. Basics of developing a control program for manufacturing parts (absolute and incremental dimensions; options for setting straight lines and circles)

3.6. Naming, creation of program frames

3.7. Program structure (setting the workpiece, offset of the zero point of the part, the tool change point; calling the cutting tool; free approach to the beginning of processing; exit to the tool change point; straight or circular movements along the trajectory; review and assignment of simple turning cycles; review and assignment of contour turning cycles; creation of a new contour; review and assignment of hole processing cycles; review and assignment of simple milling cycles; review and assignment of contour milling cycles; creation of a new contour; sampling of residual material; graphical simulation of processing; repetition of program frames; automatic repetition of program execution)

3.8. Editing (editing program frames; contour editing)

3.9. Program management (erasing programs; renaming programs; copying programs with a new name; copying and changing program frames; copying and changing the contour with a new name; saving program data (zero points, tool data))

Advanced training program "Fundamentals of modeling in Siemens NX. Basic course"

The purpose of the program is to form professional competencies in the field of developing 3D models of products in the Siemens NX computer-aided design system, aimed at reducing the time of design development.

The teaching of the discipline provides for the following forms of organization of the educational process: lectures, practical classes, laboratory work, independent work of students.

The duration of training is 72 hours.

Thematic plan of the discipline:

1. Introduction. Settings, interface, basic commands of Siemens NX. The main modules of Siemens NX. Working with toolbars (Tool Bar), settings. Working with Siemens NX files: creating a new part, opening multiple parts, opening an existing part, saving a part, closing a part. Working with layers and attributes of objects. Selection of objects.

2. Introduction to solid-state modeling. Coordinate systems in Siemens NX. Absolute and working coordinate systems. Manipulations with the working coordinate system. Dynamic coordinate system. Determination of location points. Creating solid-state primitives: cube, cylinder, etc. The concept of building elements (features). Terminology, creation, positioning methods and editing capabilities.

3. Features of the "Operations with elements" functions: slopes, thin-walled body, equidistant faces, trimming bodies, etc. Creation and editing.

4. Introduction to the elements of the reference geometry: planes, axes, curves. Methods of assignment and editing.

5. Introduction to the sketch (Sketcher). Creating a sketch. Sketch functions, the ability to create constraints, dimensions. Editing capabilities. Updating the model.

6. Introduction to the Assembly module, terminology. Options for loading the assembly. Features of the functions "Add an existing component", "Create a new component". Coupling of assembly components, repositioning of components. Representations (facets).

7. Geometry analysis. Measuring angles and distances, checking deviations. Analysis of interference and gaps in the assembly.

8. Introduction to the "Drafting" module

Advanced training program "Fundamentals of processing in Siemens NX. Basic course"

The purpose of the program is to form professional competencies in the development of control programs for the manufacture of parts in the Siemens NX computer-aided design system, aimed at reducing the development time of control programs for CNC machines.

The teaching of the discipline provides for the following forms of organization of the educational process: lectures, practical classes, laboratory work, independent work of students.

The duration of training is 72 hours.

Thematic plan of the discipline:

1. General principles of development of control programs (UP) for CNC machines in CAD "Siemens NX". Creating a processing project file based on the master model. CAD tools in the module ITSELF.

2. Using the Operations navigator. Creating a processing geometry. Creating a tool, working with a library of tools. Creation and use of processing methods.

3. Setting the workpiece: methods of setting, determining the position of the workpiece relative to the part. Creating processing operations. Tool trajectory: creation, visualization, verification. Postprocessing. Creating an UP file.

4. General parameters of milling processing. Preliminary and final processing. A reference tool. Assignment of cutting modes.

5. Flat milling. Deep milling. Plunger milling.

6. Processing of prismatic parts. Floor and wall treatment operation. Milling of faces with borders. Contour milling by levels. Milling by trochoid. Element-based processing.

7. Hole processing. Milling of holes. Centering, drilling, capping, countersinking, deployment of holes. Boring holes. Tapping with a tap. Thread milling.

Advanced training program "Fundamentals of modeling in Compass-3D"

The purpose of the program is to form students' professional competencies in the field of development of models of parts and assemblies in the computer-aided design (CAD) Compass-3D, aimed at reducing the execution time of design developments.

The teaching of the discipline provides for the following forms of organization of the educational process: lectures, practical classes, laboratory work, independent work of students.

The duration of training is 72 hours.

Thematic plan of the discipline:

1. General information about Compass-3D CAD

1.1. System Interface

1.2. Features of working in Compass-3D CAD

1.3. Creating sketches and primitives

1.4. Measurements

2. Solid-state modeling

2.1. The extrusion element

2.2. Rotation element

2.3. Trajectory element (flat and spatial curves)

2.4. Cross-section element (displacement of the plane, setting the centerline and guide elements)

2.5. Transformations (scaling, shifting, rotation)

2.6. Boolean operations

2.7. Holes and threads

2.8. Array of elements

3. Sheet modeling

3.1. Creating a leaf body

3.2. Folds and unfolding

3.3. Closing corners

4. Assemblies

4.1. Adding Components

4.2. Placement and interfacing of components

4.3. Creating a part

4.4. On-site part editing

4.5. Adding standard elements

5. Creation of design documentation

5.1. Linked drawing (main and additional views, sections, sections)

5.2. Assembly Specification

5.3. Drawing design (dimensions, requirements, axial, positions)

Advanced training program "Fundamentals of programming of the KUKA industrial robot"

The purpose of the program is to form professional competencies in the field of developing control programs for the KUKA industrial robot, aimed at reducing the time when setting up elements of the production automation system.

The teaching of the discipline provides for the following forms of organization of the educational process: lectures, practical classes, laboratory work, independent work of students.

The duration of training is 72 hours.

Thematic plan of the discipline:

1. General safety instruction.

2. Design and operation of the KUKA robotic system.

3. Moving the robot:

- Moving the robot axes separately;

- Moving the robot in a universal coordinate system;

- Moving the robot in the main coordinate system.

4. Putting the robot into operation:

- loads on the robot;

- moving the robot in the coordinate system of the tool;

- calibration of the instrument;

- calibration of the base;

5. Execution of robot programs.

6. Handling program files.

7. Creating and changing a programmed movement:

- The main types of movements;

- Creation of movement with optimization of the clock cycle time;

- Creation of movement along the trajectory;

- Change of commands along the trajectory;

- Change of movement commands;

- Smoothing in movements.

8. Using logical functions in the robot program.

9. Configuration and programming of external tools.

10. Moving manually with a standard tool.

11. Introduction to the Expert level.

12. Variables and descriptions:

- Data storage in KRL;

- Working with simple data types;

13. Using program execution control:

- Cycle programming;

- Programming queries and transitions.

14. Working with the top-level system.

15. External automation mode.

Director of the Center:
Kiselyov Evgeny Stepanovich
Phone: 8 (8422) 77-80-37

Contact person:
Dubov Alexander Leonidovich
Теl.: +79272735256
e-mail: a.dubov@ulstu.ru

Professional development program

Information security and information protection (72 hours)
Training mode: remote

Topics of classes:
   • Fundamentals of building information security systems. Basic concepts
   • Types of protected information.
   • The State Information Security System of the Russian Federation.
   • Channels of information leakage.
   • Threats to information security. Basic concepts, terms, definitions, classification of threats.
   • Types, methods and means of information protection.
   • Threats of unauthorized access. Classes of attacks in networks
   • Impact on information systems by software (malware)
   • Protection against virus and network attacks.

Contact person:
Lylova Anna Vyacheslavovna
Теl.: +7 902 357 35 67
e-mail: lylovaannav@gmail.com

On the basis of the International Institute of Ulyanovsk State Technical University, since the beginning of 2021, teachers of educational institutions of secondary general education from the Republic of Azerbaijan, the Kyrgyz Republic, the Republic of Kazakhstan, the Republic of Tajikistan, the Republic of Uzbekistan and the Ulyanovsk Region of the Russian Federation have been trained in additional professional programs - advanced training and professional retraining programs.

The volume of the CPC program is 72 academic hours, the DPP is 288 academic hours.

Training is carried out in a distance format free of charge with the issuance of a document of education (certificate of advanced training and diploma of professional retraining).


List of professional development and retraining programs for teachers:

• Actual problems of teaching Russian in modern conditions: theory and practice
• Features of teaching Russian as a foreign language in various linguistic and cultural environments
• Modern aspects of teaching Russian literature
• Current issues of teaching mathematics in secondary school
• Theoretical and practical foundations of teaching physics in secondary school
• Modern educational technologies in teaching chemistry
• Methodological and methodological foundations for the formation of students' competencies in general chemistry
• Basics of Python programming
• Features of teaching computer science in secondary school
• Pedagogical activity of a teacher in the context of the implementation of professional and educational standards
• Pedagogical activity on the design and implementation of basic general education programs (with the qualification of a teacher (teacher of Russian language and literature))
• Pedagogical activity on the design and implementation of basic general education programs (with the assignment of the qualification of a teacher (teacher of Russian as a foreign language and literature))
• Pedagogical activity in the design and implementation of basic general education programs" (with the qualification of a teacher (teacher of mathematics and computer science)) 
• Pedagogical activity in the design and implementation of basic general education programs" (with the qualification of a teacher (teacher of physics and computer science))
• Pedagogical activity in the design and implementation of basic general education programs" (with the qualification of a teacher (teacher of chemistry and computer science))
• Management in education

Contact person:
Anna Vladimirovna Prokhorova
Теl.: +7 8422 778 192, e-mail: admission@ulstu.ru

On the basis of the Institute of Aviation Technology and Management, advanced training and professional retraining courses are conducted on the basis of higher education in the following areas: 

• Aircraft industry
• Information systems and technologies
• Organization of transportation and logistics management in transport

 
Contact person:
Pozdnyakova Svetlana Vladimirovna
Теl.:  8 (8422) 20-96-96

Course "Business entrepreneurship: legal regulation, planning, taxation practice"

This course is focused on the formation of students' comprehensive knowledge about the principles and methods of doing business in order to develop management decisions and improve the efficiency of a small enterprise.

The course consists of 4 blocks:

• The essence of entrepreneurship and its types. Organizational and legal forms of entrepreneurial activity. State registration of business entities. State types of support for SMEs.

• The main taxation systems of business entities. Tax planning of entrepreneurial activity.

• Choosing a business idea. Development of a business plan.

• Assessment of the efficiency of economic activity.

Duration of training: 1 month.

    

Contact person:

Kurakova Natalia Ivanovna

Tel.: +7 (929)-793-27-28, +7 (8422) 778-601,

email address: emf@ulstu.ru

"Basics of SMM"

SMM manager is a specialist responsible for promoting a brand or product in social networks (Social Media Marketing).

You will learn how to promote a business in social networks, run ads, work with messengers and make a content plan. You will be able to master the basics of a sought-after profession from scratch.

Course program:

1. Introduction to Social Media Marketing

2. Development of SMM strategy. Audience and competitor analysis. Definition of the target audience.

3. Design and setup of communities.

4. Content policy.

5. Creating visuals for different business tasks.

6. Targeted advertising.

7. Community and working with the audience. Working with bloggers.

8. Analytics.

At the end of the program, you will learn:

1. Segment the audience, analyze the market and competitors.

2. Create promotion strategies in social networks.

3. Create content for social networks.

4. Create images and videos for texts.

5. Launch targeted advertising.

6. Learn how to work with Facebook/Instagram and VKontakte advertising cabinets.

7. Learn how to create a creative and customize campaigns.

8. Analyze the promotion.

How is the training going:

1.Analysis of the topic in full-time class

2. Completing homework

3. Discussion of the assignment with the teacher Consolidation of knowledge and correction of errors.

4. Protection of the final task.

Duration of training: 1 month.

Upon graduation, a certificate of advanced training (72 hours) is issued (if there is a diploma of secondary special or higher education).

Contact person:

Olga Egorova

Tel.: +7-904-194-4303, +7 (8422) 778-601

email address: dokest@mail.ru , emf@ulstu.ru

"Legal regulation of labor relations: topical issues"

As a result of the training, you receive not only current knowledge in the field of labor law, but also a certificate of advanced training (72 hours).

The course consists of 5 sections:

• Employment contract

• Working time and rest time

• Remuneration of labor. Material liability of the parties to the employment relationship

• Labor discipline and disciplinary responsibility

• Labor protection.

Lawyers and HR specialists need to be aware of changes in the field of labor law. The program will allow you to keep abreast of the latest changes in labor legislation.

The course is conducted by leading teachers of the Department of "Personnel Management" of UlSTU.

Course start date: October 2021.

Duration of training: 1 month.

The training is conducted in full-time and part-time with the use of distance learning technologies.

Contact person:

Steklova Olga Evgenievna

Tel.: +7 (917)-630-64-38 , +7 (8422) 778-601,

email address: emf@ulstu.ru

"Modern operational activity of a commercial bank".

You get not only theoretical knowledge and practical skills in this field, but also the opportunity to get an internship at PJSC Bank "FC Otkritie".

The course consists of 9 blocks:

• The concept of banking business.

• Fundamentals of banking management.

• Fundamentals of countering the legalization (laundering) of proceeds from crime and the financing of terrorism.

• Fundamentals of credit and deposit administration.

• Fundamentals of currency control.

• Fundamentals of operational support for legal entities.

• Support of settlement transactions of individuals.

• Basics of opening and closing accounts.

• Working with requests from government agencies.

The program is maximally adapted to:

• the bank's requests for promising, successful, maximally trained personnel;

• the ability of students to successfully continue their studies, combining it with the bank's training program.

Duration of training: 4 months.

 

Sign up for the course if you:

• Student of the 4th-6th year of economic/technical direction;

• You want to study and get real practical experience.

Contact person:

Starostina Tatiana Gennadievna

Tel: +7 (927)-820-10-42, +7 (8422) 778-601,

email address: emf@ulstu.ru

 

"Strategic Enterprise Management"

In the era of transformation, strategic management acquires new facets. Dynamic changes in the environment require the manager to search for unique company resources that provide competitive advantages.

The program will be useful for top managers, managers of various levels and entrepreneurs interested in sustainable business development in today's realities.

In the program:

• Definition of the role and place of the strategic management system in the management system of the organization and the architecture of the enterprise.

• Modern strategic analysis.

• Defining the goals and objectives of the strategic management of the organization in conditions of uncertainty, crisis, transition to a new stage of business development.

• Principles of involving key specialists in the development of strategic management goals and objectives.

• Development of a tree of goals and objectives of strategic management of the organization, taking into account the specifics of its activities.

• The choice of a promising strategy for the development of the company, based on the factor analysis of the environment.

• Implementation of strategic control.

• Risk management in the development and implementation of the strategy at the enterprise.

Learning result:

• Conducting a strategic analysis of the enterprise and determining the strategic orientation

• Activation of elements of systemic, intuitive, analytical, scenario and critical thinking

• Visualization of strategic goals and objectives of the organization for employee engagement

• Creating sustainable medium- and long-term strategic plans

The training period is 1 month

Number of hours - 72

Graduation document – certificate of advanced training

Contact person:

Churashkina Anna Vladimirovna

No.: +7-9510-92-94-94, +7 (8422) 778-601,

email address: emf@ulstu.ru

"Technological entrepreneurship"

In modern conditions, companies need to invest significant efforts and funds in the development and promotion of new technologies. This requires managers and employees of companies to have and develop competencies in the field of technological entrepreneurship, knowledge of the methodology for developing a strategy for the implementation of a technological project.

The program will be useful for top managers, managers of various levels and entrepreneurs interested in creating and promoting technology startups.

In the program:

• Technological audit and its methodology.

• Formation of competencies in the field of transfer of technological achievements to business.

• Mechanisms of state, commercial and venture financing.

• The main methods and technologies of project management, including project risk management.

• Features of motivation for technological innovation and creation of new products.

• The processes of developing technology startups and bringing them to market.

Learning result:

• Conducting a technological audit at the enterprise and determining the directions of further technological development.

• Formation of the technological profile of the company.

• Development of a technology startup and the choice of tools for its promotion on the market.

The training period is 2 months

Number of hours - 72

The program starts in October 2021.

Contact person:

Tsitsarova Natalia Mikhailovna

Tel.: +7(927) 633-85-71, +7 (8422) 778-601

e-mail: emf@ulstu.ru

"Personnel management in a modern organization: organizational and cultural aspect"

As a result of the training, you get theoretical knowledge about organizational culture, methods of its study, formation, as well as practical skills of influencing personnel by changing organizational culture.

The course consists of 4 sections:

• Organizational culture as a factor of personnel management

• The study of organizational culture

• Changing organizational culture

• Assessment of the impact of changes in organizational culture on personnel management

HR specialists often face resistance to change on the part of the organization's employees, loss of interest in work, and a decrease in staff loyalty.

The program helps to quickly identify problems related to organizational culture, is aimed at mastering the tools of effective personnel management.

At the end of the training, students complete their final qualification work and receive a certificate of advanced training (72 hours).

The training is conducted in full-time and part-time with the use of distance learning technologies.

Duration of training: 1 month.

Contact person:

Steklova Olga Evgenievna

Tel.: +7 (917)-630-64-38 , +7 (8422) 778-601,

email address: emf@ulstu.ru

Professional retraining under the program "Technosphere safety: labor protection" (254 hours)
Form of study: correspondence (using distance learning technologies) ;
Duration of training : from 3 months ;
Issued document: UlSTU Diploma on professional retraining

Advanced training in the program "Occupational safety management at the enterprise" (72 hours)
Form of study: correspondence (using distance learning technologies) ;
Duration of training : 1 month;
Issued document: UlSTU Certificate of advanced training


Director of the Scientific and Educational Center for Occupational Safety of UlSTU
Kudrin Alexander Nikolaevich
Теl.: 8–927–803–36-44 ; e-mail: a.n.kudrin@mail.ru

Advanced training in the program "Fundamentals of management and technical operation of apartment buildings"

Number of hours: 72 hours

Form of study: full-time and part-time

A brief educational and thematic plan:

• MCD management

• Technical operation and maintenance of residential buildings

• Operation and seasonal inspection of MCD building structures

• Energy service contract

• Organization and carrying out of capital and current repairs of buildings

• Fundamentals of pricing and tariff formation in the housing and utilities sector

Number of hours: 72 hours

Form of study: full-time and part-time

A brief educational and thematic plan:

• Legislative, regulatory and technical documentation in construction. Technical regulation. Urban Planning Code of the Russian Federation

• Legal basis of investment activity in construction

• The procedure for the development of project documentation, its coordination, approval and composition

• Organization and maintenance of inspection of the technical condition of buildings and structures

• Development of special sections of project documentation

• Environmental protection

• Engineering and technical measures of civil defense and emergency situations

• Estimated documentation, pricing and estimated rationing in construction

• Quality control of project documentation development

• Author's and technical supervision
  

Advanced training under the program "Construction of buildings and structures: general construction and finishing works, functions of the customer-developer and general contractor"

Number of hours: 72 hours

Form of study: full-time and part-time

A brief educational and thematic plan:

• Legislative, regulatory and technical documents in construction

• Preparatory and excavation work on the construction site

• Foundation construction and pile work

• Installation of precast reinforced concrete and concrete structures

• Installation of metal structures

• Installation of light enclosing structures

• Finishing works

• Anti-corrosion protection of building structures

• Organization of construction production. Functions of the customer-developer and general contractor

• Basic requirements for the performance of construction and installation works

• Quality control system in the production of works
  

Advanced training in the program: "Pricing and estimated rationing in construction"

Number of hours: 72 hours

Form of study: full-time and part-time

A brief educational and thematic plan:

• Introduction. The system of pricing and estimated rationing in construction

• The main MDS, GOS and other legislative acts

• Classification of works

• Structure of the estimate documentation

• Collection of GESN, FER, TER

• The cost structure as part of the local estimate. The structure of the estimated cost of the SMR.

• The procedure for determining direct costs. Methods of calculating estimates.

• The basic index method of calculating estimates. Indices and market coefficients

• Working with basic materials in the estimate

• Resource method for calculating estimates

• Coefficients and accruals.

• Calculation of overhead costs and estimated profit

• Calculation of limited costs

• Object and summary estimates

• Payment for the work performed. Creation of acts based on estimates

• Preparation of local estimates for general construction works

• Preparation of local estimates for repair and construction works

• Making estimates for installation work

• Preparation of estimates for commissioning.
  

Contact person:
Kukanov Nikolay Ivanovich
e-mail: n.kukanov@ulstu.ru

«Accounting and 1C: Accounting»

This program is focused on:

• for those who want to become a professional accountant and master competencies in this field;

• for accountants who had a career break in order to update their knowledge in the field of accounting; for accountants who had a career break in order to update their knowledge in the field of accounting;

• for 1C programmers, for whom it is important to understand the accounting process in order to properly configure the functionality of the program.

Mastering the program will allow you to effectively organize accounting at the enterprise. After completing the training, you will be able to carry out all accounting operations, draw up balance sheets, generate any reports.

The training program includes all stages of the organization's life: from filling out reference books to forming a balance based on practical examples in the 1C program.

Learning goals and objectives:

• formation of the basics of accounting thinking;

• development of the ability to distinguish important nuances in the documentation that reflect the work of the enterprise and will be adequately perceived by contractors and regulatory authorities;

• mastering all the operations that an accountant will face in his professional activity;

• registration of primary accounting documents;

• implementation of accounting transactions on accounts;

• payroll and tax calculation;

• restoration of documents for previous tax periods;

• providing financial information in the way most acceptable to counterparties;

• practical preparation for professional activity in the studied field;

• preparation for submission of reports to the tax authorities.

Mastering the training program will allow the student to have professional competencies in the field of accounting according to the Professional standard 08.002 "Accountant":

• acceptance of primary accounting documents on the facts of the economic life of an economic entity for accounting;

• monetary measurement of accounting objects and current grouping of facts of economic life;

• preparation of accounting (financial) statements.

Duration of training: 3 months.

 

Contact person:

Mansurov Pavel Mikhailovich

Теl: +7 (909)-355-64-69, +7 (8422) 778-601

e-mail: emf@ulstu.ru

«Translator in the field of professional communication»

The purpose of the program is to form students' professional competencies necessary for professional activity in the field of applied translation studies by branches of knowledge. The main objectives of the retraining program are:

• obtaining basic linguistic knowledge, skills and abilities in the field of modern theory and practice of translation studies, necessary for practical translation and for the objective selection and evaluation of translation solutions, techniques and methods of translation.

• the formation of a worldview, the development of critical thinking and intelligence, erudition, the formation of additional foreign language linguistic professional competencies in the profile of their activities.

The program also focuses students' attention on modern tools and environments (the Internet, national and special text corpora, electronic dictionaries) in the field of new information technologies that improve translation practice.

As a result of mastering the program , the listener must have the following professional competencies: the ability to use the conceptual apparatus, approaches and methodological basis of the theory and practice of translation in their professional activities. 

As a result, the listener of the program:

• Knows the conceptual apparatus, approaches and methodological basis of the theory and practice of translation.

• He is able to apply in practice the conceptual apparatus, approaches and methodological basis of the theory and practice of translation.

• He has practical experience in applying the conceptual apparatus, approaches and methodological basis of the theory and practice of translation in his professional activity

The labor intensity of training under this program is 1500 hours, including all types of contact and independent educational work of the listener. The total duration of training is 2 years.

The form of training is full–time and part-time, including using e-learning components.

Contact person:
Sosnina Ekaterina Petrovna
Теl.: +79603785629
e-mail: sosnina@ulstu.ru

"Computer graphics"
The purpose of the course is to master the basics of knowledge, skills and abilities necessary for training in the system of higher professional education. The course includes basic information on computer graphics, information about the types of graphic editors and their applications. Students develop skills for solving creative tasks using computer technology.
The task of studying the subject is mainly to study the basics of presenting artistic and design developments by means of computer modeling.

Thematic plan for the study of the discipline:

• Introduction to Computer Graphics
• CorelDRAW Program
• Photoshop program 

Course duration: 68 hours


"Composition"
The purpose of the course is to master the basics of knowledge, skills and abilities necessary for training in the system of higher professional education. The course includes initial information on the types and laws of composition and areas of their application. Students develop skills for solving creative tasks in drawing techniques.
The task of the subject is to study the basics of composition, the laws of perspective and the ability to represent artistic and design developments by means of drawing.

Thematic plan for the study of the discipline:

• Perspective drawing of simple geometric bodies
• Basic laws of perspective
• The main types of perspective : frontal and angular
• Composition in the drawing
• Drawing geometric bodies in perspective
• Composition of geometric bodies. Sketch.
• Linear-constructive drawing of a composition of geometric bodies according to the representation in A2 format.

Course duration: 96 hours


"Technical drawing" 

The aim of the course is to firmly master the basics of knowledge, skills and abilities necessary for studying in the system of higher professional education. The course includes training in the technique of drawing works; performing geometric constructions and reading drawings for various purposes;  solving projective-geometric problems in drawings; performing complex drawings of technical forms including axonometric projection.    The development of spatial representation and imagination, constructive geometric thinking, the ability to construct spatial forms and relationships in the form of planar graphical models. The course includes the study of the basics of descriptive geometry. 

The task of studying the discipline is mainly to study the methods of obtaining certain graphic models of space based on orthogonal and central projection and the ability to perform competent design of the obtained images in the form of technical drawings in accordance with the requirements of GOST.

Thematic plan for the study of the discipline:

• Introduction, basic concepts, tools, materials and equipment for drawing works technique of performing drawing works
• Construction of conjugations of straight lines
• Construction of conjugations of circles and curves
• Drawing standards, Drawing fonts, architectural
• Monge plot, point, straight plane
• Projections of geometric bodies, a point on the surface of a geometric body, construction of an intersection line of geometric bodies.
• Construction of intersection lines of geometric bodies
• Construction of projections of combinations of geometric bodies
• Fundamentals of mechanical engineering drawing. Views, sections, sections
• Axonometric projections
• Construction drawing, features of construction drawings
• Drawing floor plans
• Drawing facades of buildings
• Drawing sections of buildings
• Fundamentals of architectural presentation of architectural projects

Course duration: 68 hours


"Technical drawing 

The aim of the course is to firmly master the basics of knowledge, skills and abilities necessary for studying in the system of higher professional education. The course includes training in the technique of drawing works; performing geometric constructions and reading drawings for various purposes; solving projective geometric problems in drawings; performing complex drawings of technical forms including axonometric projection.    The development of spatial representation and imagination, constructive geometric thinking, the ability to construct spatial forms and relationships in the form of planar graphical models. The course includes the study of the basics of descriptive geometry.
The task of studying the discipline is mainly to study the methods of obtaining certain graphic models of space based on orthogonal and central projection and the ability to perform competent design of the obtained images in the form of technical drawings in accordance with the requirements of GOST.

Thematic plan for the study of the discipline:

First year of study

• Introduction, basic concepts, tools, materials and equipment for drawing works
• Technique of execution of drawing works
• Construction of conjugations of straight lines
• Construction of conjugations of circles and curves
• Drawing standards
• Drawing, architectural fonts
• Monge plot, point, straight plane
• Classification of straight lines and planes
• Projections of geometric bodies, a point on the surface of a geometric body
• Construction of intersection lines of geometric bodies

Second year of study

• Construction of projections of combinations of geometric bodies
• Fundamentals of mechanical engineering drawing. Types
• Drawing machine-building sections
• Drawing sections
• Building shadows in orthogonal projections
• Axonometric projections
• Construction of axonometric projections. Combinations of geometric bodies

Third year of study

• Construction of orthogonal projections according to a given axonometry of a combination of geometric bodies.
• Shadow construction in axonometry
• Perspective, the construction of perspective images of geometric bodies and architectural compositions.
• Building shadows in perspective.
• Construction drawing, features of construction drawings
• Drawing floor plans
• Drawing facades of buildings
• Drawing sections of buildings
• Fundamentals of architectural presentation of architectural projects

Course duration: 204 hours



Contact person:
Sotnikova Valentina Olegovna
Теl: 8(905) 184 12 11
e-mail: sotnikova-vo@mail.ru

Course duration: 102 hours



"Drawing"
Purpose of the course –  mastering students  the basics of knowledge, skills and abilities necessary for training in the system of higher professional education.  The course includes initial information on drawing graphics, information about perspective drawing  and the areas of their application.  Students develop skills for solving creative tasks with different materials (pencil, charcoal, sanguine.)  in the technique of drawing.

Thematic plan for the study of the discipline:

• Perspective drawing of simple geometric bodies
• Basic laws of perspective
• The main types of perspective : frontal and angular
• Composition in the drawing
• Drawing geometric bodies in perspective
• Drawing a cube in perspective.
• Drawing of a four-sided prism.
• Still life drawing of three geometric figures
• Drawing of geometric shapes and draperies

Course duration: 102 hours

Contact person:
Sotnikova Valentina Olegovna
Теl: 8(905) 184 12 11
e-mail: sotnikova-vo@mail.ru

The Computer School of the Faculty of Information Systems and Technologies (KSH FEST) was founded more than 20 years ago. It is attended by children of different ages in several programs on the basis of three departments of the Faculty of Information Systems and Technologies of UlSTU, as well as on the basis of four educational institutions of Ulyanovsk: secondary school No. 61, secondary school No. 76 named after. Ho Chi Minh, Gymnasium No. 34 and the City Lyceum at UlSTU.
KSH FIST UlSTU is an important step for young people to get in-demand IT professions in the future. Here, the students successfully study the basics of programming in popular programming languages, gain basic knowledge on the development of two-dimensional and three-dimensional games using various software tools and platforms, learn how to create their own chatbots for VK and Telegram, work with databases and graphics packages for two-dimensional and three-dimensional modeling as part of a computer graphics course, prepare for the Unified State Exam and OGE in computer science. Thanks to this, they come to the university with a good knowledge base, and therefore in the future they can successfully find a job in an IT company. Schoolchildren demonstrate their skills at various competitions of regional, All-Russian and international levels and annually take prizes in them.

Training programs:

• Preparation for the Unified State Exam in Computer science (grades 10 and 11)
• Fundamentals of Computer Science and programming in Python (based on Grade 9)
• Olympiad programming
• Engineering programming
• Game design and programming of multiplayer games
• Programming games on the Unity platform
• Development of game chatbots in Python
• Web site development
• Computer graphics

Duration of each course: 100 ac.h.


Contact person:
Lylova Anna Vyacheslavovna
Теl.: +7 902 357 35 67
e-mail: lylovaannav@gmail.com

The purpose of the program is to form students' professional competencies necessary for professional activity in the field of applied translation studies by branches of knowledge. The main objectives of the retraining program are:

- obtaining basic linguistic knowledge, skills and abilities in the field of modern theory and practice of translation studies, necessary for practical translation and for the objective selection and evaluation of translation solutions, techniques and methods of translation.

- the formation of a worldview, the development of critical thinking and intelligence, erudition, the formation of additional foreign language linguistic professional competencies in the profile of their activities.

The program also focuses students' attention on modern tools and environments (the Internet, national and special text corpora, electronic dictionaries) in the field of new information technologies that improve translation practice.

As a result of mastering the program , the listener must have the following professional competencies: the ability to use the conceptual apparatus, approaches and methodological basis of the theory and practice of translation in their professional activities.

As a result, the listener of the program:

- Knows the conceptual apparatus, approaches and methodological basis of the theory and practice of translation.

- Is able to apply in practice the conceptual apparatus, approaches and methodological basis of the theory and practice of translation.

- Has practical experience in applying the conceptual apparatus, approaches and methodological basis of the theory and practice of translation in his professional activity.

The labor intensity of training under this program is 1500 hours, including all types of contact and independent educational work of the listener. The total duration of training is 2 years.

The form of training is full–time and part-time, including using e-learning components.


Контактное лицо:
Соснина Екатерина Петровна
Тел.: +79603785629
e-mail: sosnina@ulstu.ru

Professional retraining program "Expert in technical control and diagnostics of motor vehicles"  

This program is intended for operators of technical inspection of motor transport in accordance with the order of the Ministry of Industry and Trade of the Russian Federation dated March 20, 2020 No. 918 "On approval of qualification requirements for technical experts". This program provides for the issuance of a diploma of professional retraining of the established sample with the assignment of qualifications.

Duration: 260 academic hours

A professional development program "Expert in technical control and diagnostics of motor vehicles" is also possible for operators of technical inspection of motor vehicles with the issuance of a certificate of advanced training.

Duration: from 32 to 112 hours.

"The system of state and municipal administration"

1. The purpose of the program
For whom the program is designed:
- persons with a diploma of higher education;
- persons receiving higher education: bachelor's degree (3rd and 4th year of study), master's degree (1st and 2nd year of study), specialty (not earlier than the 4th year of study).

Purpose:
- formation of students' professional competencies necessary for professional activity in the field of public and municipal administration;
- improving the socio-economic and political status, establishing more effective communications with state and municipal authorities;
- the right to work in state and municipal authorities.

2. The result of mastering the program
As a result of mastering the program, the listener will:

Possess:
- the ability to analyze, organize and plan in the field of public and municipal administration;
- organizational skills: be able to find and make organizational management decisions;
- ability to manage in crisis situations;
- have the skills and willingness to form teams to solve tasks;
- the ability to verify and structure information obtained from different sources.

Possess:
- HR management and HR audit technologies;
- skills in using economic policy instruments;
- modern methods of diagnosis, analysis and problem solving, as well as methods of decision-making and their implementation in practice.

Be able to:
- plan the activities of the public authority in conjunction with the overall development strategy of the state and the region;
- to develop an organizational structure that is adequate to the strategy, goals and objectives, internal and external conditions of the activity of a public authority, to distribute functions, powers and responsibilities among performers;
- develop solutions that take into account the legal and regulatory framework;
- to understand the current trends in the development of political processes in the world, the world economy and globalization, to navigate issues of international competition;
- develop strategic, current and operational control systems;
- use information technology to solve various research and administrative tasks.

The student who has mastered the program must have knowledge and skills:
- substantiation of trends in the development of society and the system of state and municipal administration;
- solve problems in the field of public and municipal administration;
- methods of management in the social sphere.

3. Document on the end of the program
Diploma of professional retraining with the assignment of qualifications


Director Shigabutdinova Guzel Mirkhayzanovna tel.: 778-334

Graduate School of Management

Implements the following programs:

• Presidential Management Training Program "Innovative Management Strategies"
• Master of Business Administration (MBA)
• Professional development program "Entrepreneurship: from idea to start"
• Professional development program "Techniques and practices of human resource management"
• Professional development program "Business English"
• Professional retraining program "Internet marketer"
• Professional development program "Quality management System GOST R ISO 9001-2015"
• Professional development program "Project Management"

MBA SMART
This program provides a full range of theoretical and practical knowledge in the fields of:

• Personal and professional effectiveness
• Corporate management
• Personnel Management
• Economic , legal and digital business environment
• Global economy
• Finance, Marketing
• Project management

MBA graduates gain skills:

• Managing a company in a crisis;
• Building a successful business model;
• Positioning of the company in the market;
• Competent sales management;
• Using brand management tools;
• Effective organization of staff work;
• Business Analysis;
• The Art of negotiation;
• Development and commercialization of the project

Duration of study: 1 academic year (October 2021 - October 2022); weekly (Tuesday and Wednesday) for 4 academic hours (from 17 to 20 hours).

«Master of  Business Administration (МВА)»

The purpose of the professional retraining program "Master of Business Administration (MBA)" is to train senior managers and broad-profile consultants with modern knowledge and skills that allow them to effectively manage organizations or their structural divisions.

The field of professional activity of a student who has been trained under the professional retraining program to perform a new type of professional activity "Master of Business Administration (MBA)" includes:

1. management activities in organizations of any organizational and legal form in which graduates work as performers or managers in various services of the management apparatus;

2. managerial activity in state and municipal government bodies;

3. entrepreneurial and organizational activities in structures in which graduates are entrepreneurs developing their own business;

4. research activities in scientific organizations related to the solution of management problems;

A student who has successfully completed training under this program must solve the following professional tasks in accordance with the types of professional activity:

1. Organizational and managerial:

• development of strategies for the development of organizations and their individual divisions;

• management of divisions of enterprises and organizations of various forms - ownership, state and municipal authorities;

• organization of creative teams (teams) to solve organizational and managerial tasks and their management;

2. Analytical:

• search, analysis and evaluation of information for the preparation and adoption of management decisions;

• analysis of existing forms of organization and management processes, development and justification of proposals for their improvement;

• evaluating the effectiveness of projects taking into account the uncertainty factor;

"Management in small and medium-sized businesses"

The purpose of the program is to promote the development of entrepreneurship, small and medium-sized businesses in Russia and the Ulyanovsk region through the formation of a system of knowledge, competencies, skills and values necessary for managers to effectively manage the development and competitiveness of enterprises.

A student who has successfully completed training under this program must solve the following professional tasks in accordance with the types of professional activity:

1. Organizational and managerial:

• development of strategies for the development of organizations and their individual divisions;

• management of divisions of enterprises and organizations of various forms - ownership, state and municipal authorities;

• organization of creative teams (teams) to solve organizational and managerial tasks and their management;

2. Analytical:

• search, analysis and evaluation of information for the preparation and adoption of management decisions;

• analysis of existing forms of organization and management processes, development and justification of proposals for their improvement;

• evaluating the effectiveness of projects taking into account the uncertainty factor;

Additional professional retraining program "Training of highly qualified specialists in the field of design and production of four-wheel drive cars".

The program is implemented by order of the company LLC "UAZ". The purpose of the program is to form students' professional competencies necessary for the design and production of four-wheel drive cars.

The development of the program by students contributes to the instilling of engineering skills at the place of future work of university graduates, reducing the period of adaptation of young specialists at the enterprise.

The program is implemented on the basis of educational programs of higher education:

• direction of training 23.00.00 - Equipment and technologies of land transport, specialty 23.05.01 - Cars and tractors;

• direction of training 15.03.05 - Design and technological support of machine-building industries, profile "Technology of mechanical engineering";

• direction of training 15.03.01 - Mechanical engineering, profile "Machines and technology of metal processing by pressure".

The labor intensity of the training program is 612 hours, including all types of contact and independent work of students. The total duration of training is 10 months.

The students of the program can be students of the 4th year of bachelor's degree and the 5th year of specialty of the above directions.

Students of the program study disciplines:

• Engineering and technological methods of ensuring the quality of parts in the automotive industry;

• Basics of modeling in NX;

• Special course on the design of four-wheel drive cars;

• Fundamentals of car manufacturing technology.

The training is conducted in the educational laboratories of UlSTU and the basic department at the company "UAZ" LLC. The training is conducted by qualified teachers of the UlSTU Faculty of Mechanical Engineering and leading specialists of UAZ LLC.

Students who successfully master the educational program receive a monthly stipend of 8000 rubles from the company.

Upon completion of the training, students receive a diploma of professional retraining.

Training program:

https://disk.yandex.ru/i/HVHi56qSRxDblg

 

Director of the UIMC:

Pravikov Yuri Mikhailovich,

Tel.: +7 (8422) 41-80-16; e-mail: y-pravikov@yandex.ru

The Center for Continuous Professional Development implements programs of additional education
advanced training and professional retraining (with the issuance of a diploma of professional retraining)
in a wide range of areas:

• Information technology and information security
• Economic security
• Marketing and Management
• Personnel management
• Standardization and metrology
• Power supply
• Pedagogy and psychology
• First aid
• Anti-corruption activities
• Fundamentals of Digital Development

Contact information:
Tel.: 8(8422) 41-80-93
E-mail: cnpr.inno@gmail.com
Address: 432063, Ulyanovsk, Engels str., 3, office 118
Opening hours: MON-FRI 8:30 - 17:20 (lunch break: 13:00 - 13:40), SAT-SUN day off

Digital Marketing
The course is suitable for those who are interested in using all Internet marketing tools to promote a product or service, company or personal brand.
The course will allow you to master all the tools of SEO, SMM, content marketing and others.
Duration: 1 month
Training program:
https://disk.yandex.ru/i/UgGU3IjIBzubAw

Management technologies
The management system at the enterprise: management in the era of change. The influence of the head on the activities of the organization.
Duration: 1 month
Training program:
https://disk.yandex.ru/i/BstErGhwHHFSMA

Modern management technologies
The program will allow everyone to master the basics of strategic enterprise management, to understand how business develops in conditions of uncertainty, complexity of the environment.
The program is aimed at those who want to know what tools can be used to develop a real enterprise strategy and successfully implement it.
If you are a student, a specialist or an entrepreneur and are interested in the success of an enterprise or the creation of your own business, this program is for you! A well-conducted strategic analysis is the basis for the successful preparation of a business plan and the implementation of the strategy.
Duration: 1 month

Management technologies: Time management
During the course, you will master modern time management tools: analysis of working time, planning, as well as its organization and control. You will master the principles of prioritization when planning both personal and work time.
Duration: 8 hours
Training program:
https://disk.yandex.ru/i/JEVXlZYcB76ErQ

Management technologies: Risk management
The program allows you to master the implementation of a risk management system in an organization and master the tools for analyzing, evaluating and forecasting project risks.
Duration: 8 hours
Training program:
https://disk.yandex.ru/i/fuKR-VkUJulYBw

Modern strategic analysis and corporate strategies
The program is aimed at those who want to master the tools with which you can successfully analyze the internal and external environment of the enterprise, necessary for decision-making.
The program will allow everyone to master the basics of strategic enterprise management, to understand how business develops in conditions of uncertainty, complexity of the environment.
Duration: 1 month
Training program:
https://disk.yandex.ru/i/eelYBJYmegNCQA


Contact person:
Churashkina Anna Vladimirovna
Tel.: +79510929494
e-mail: Cbe73@bk.ru

The Institute of Continuing Education (Ino) implements additional education programs in a wide range of areas:

As part of InNO:

• The structure of higher education implemented using distance technologies
• Center for Continuous Professional Development
• Graduate School of Management

Additional education is implemented in the following areas:

• Information technology and information security
• Economic security
• Marketing and Management
• Personnel management
• Standardization and metrology
• Power supply
• Pedagogy
• First aid
• Anti-corruption activities
• Digital educational resources

Contact information:
Tel.: 8(8422) 41-80-93
e-mail: cnpr.inno@gmail.com

Databases. Practical course for building databases in PostgreSQL 9.5 environment
One of the most common applications in the world of information systems is databases.
Studying the course allows you to start implementing your own information systems, the core of which will be the PostgreSQL 9.5 DBMS, which is a freely distributed software product.
Duration: tt 16 hours to 60 hours

Accounting in the 1C: Accounting 8 environment 
Вcurrently, accounting at enterprises is conducted using automated accounting tools. Among the most popular accounting automation tools are 1C developments built on the 1C: Enterprise 8 platform.
Studying the course forms the skills of working with 1C: Accounting 8 in user mode.
In the process of studying the course, students get acquainted with the basic terms, concepts, principles of accounting organization in Russia
The course is aimed at developing students' basic knowledge of the theoretical foundations and practical skills of accounting in the 1C system.
Duration: 44 hours

Designing in the 1C: Enterprise 8 environment
The course includes material that allows you to develop the basic skills of configuring the 1C platform.
1C: Enterprise 8 is a software system and includes a technology platform, application solutions of various scales and different directions created on its basis, a methodology for creating application solutions and information technology support for users and developers.
Studying the course allows you to work with the 1C: Enterprise 8 architecture, the main configuration objects, including those related to accounting. The course includes, among other things, complex periodic calculations.
Duration: 44 hours

Office technologies
Office technologies are firmly integrated into everyday life.
The presented course allows novice users to work in the Windows operating system, in the MS Word word processor, in the MS Excel spreadsheet processor, with the MS PowerPoint presentation wizard.
The course allows students to acquire skills in working with antivirus programs
Duration: from 16 to 44 hours

Development of user interfaces
Development of user interfaces using Windows Presentation Foundation technology

Windows Presentation Foundation (WPF) is the latest system for building Windows client applications with visually appealing user interaction capabilities. With WPF, you can create a wide range of both standalone and browser-hosted applications. At the heart of WPF is a vector visualization system that does not depend on resolution and was created with the expectation of the capabilities of modern graphics equipment. WPF extends the basic system for building user interfaces with a full set of application development functions, including XAML (Extensible Application Markup Language), controls, data binding, layout, two- and three-dimensional graphics, animation, styles, templates, documents, multimedia, text and design. WPF is part of Microsoft .NET Framework and allows you to create applications that include other elements of the class library.NET Framework. 

The proposed course will be of interest to developers engaged in designing user interfaces, as well as to everyone who wants to expand their professional skills and capabilities.

What can we teach? 

The proposed course covers a range of issues related to the study of the following sections:

• Basics of Windows Presentation Foundation. Graphics in Windows: GDI and DirectX. XAML markup language, declarative description of the user interface. Layout in WPF, markup managers, content management tools. Classic controls. Windows, pages and navigation. Teams and resources.

• Styles, shapes. Transformations and brushes. Control templates.

• Data binding, data templates, and data representations.

• WPF documents. Printing in WPF.

• Animation and multimedia in the user interface.

• Application deployment. ClickOnce publishing, simple publishing, publishing options.

Duration: 74 hours

Functional programming in the F language#
F# is a functional programming language from a family of languages.NET Framework that supports functional programming in addition to imperative (procedural) and object-oriented programming. The structure of F# is in many ways similar to the structure of OCaml, with the only difference that F# is implemented on top of libraries and the .NET runtime. F# is closely integrated with the Visual Studio development environment and is included in the Visual Studio 2010 package, there are also compilers for Mac and Linux. A number of problems are solved much easier and clearer using F#, especially those using mathematical programming style. For example, writing compilers or mathematical data processing tasks. Microsoft has integrated the F# development environment into Visual Studio 2010. Microsoft plans to actively implement this language in the development of software systems that will be able to scale themselves over time, for example, depending on the number of users. This advantage is very difficult to implement in imperative programming languages.
The proposed course will be of interest to developers involved in the creation of compilers or mathematical data processing, as well as to anyone wishing to expand their professional skills and capabilities.
Duration: From 66 hours


Form of study: full-time, part-time


Contact person: 
Larionova Olga Borisovna
Теl.: 8 (8422) 778-345
e-mail:ob@ulstu.ru